Position Title: Millwright Reports to: Lead Millwright Department: SPW Maintenance Wage: Varies depending on qualifications Shift: Days/Swing
Anything over 50 lbs.: Environment: Maximum # lifted Maximum # carried Maximum # push/pull 2 people required Outside 50% without assistance: without assistance: without assistance: Inside 50% 50 lbs. 50 lbs. 50 lbs.
Working Environment: (1) Inside 50%, average temperature 80 degrees, extreme low temperature 10 degrees F, extreme high temperature 120 degrees F. (2) Outside 50%. Noise or vibration: Machine noise to include machine being operated as well as other machines close by including Forklifts. Hazards: See Job Hazard Analysis. (3) Atmospheric conditions: Dust: Limited, Mist: Water, Odors: Dry wood, Gasses: None, Poor Ventilation: None. The worker in this position will be standing on a slightly elevated wooden platform with rubber mats. The worker will move back and forth on this platform in front of an elevated dry conveyor measuring 3 ½ to 4’ above the ground. Physical/Mental Demands: See the attached Job/Task Evaluation and Physical Capabilities portion; this position requires constant use of hearing and vision, frequent bending, twisting, pushing/pulling and reaching, and occasional lifting/carrying/pushing/pulling more than 50 lbs. Skills: Must be able to communicate effectively with Maintenance Director, lead millwright, electricians, production supervisors, machine operators, and cleanup via face to face meetings, radio, and telephone regarding troubleshooting, preventive maintenance, safety, etc. Must be able to write legibly. Vision/hearing/touch continuously; reading and speech required to communicate comprehension of Job Hazard Analysis, monthly safety training topics, and Job Certification if applicable. Other skills include (but are not limited to): • Welding and fabricating. • Repair hydraulic, pneumatic, and mechanical systems; machine alignment. • Read blue prints. • Basic knowledge of electrical systems in manufacturing. • Ability to identify different metal compositions, work with a variety of millwright tools, and use machine specific lockout procedures. • Ability to use fall protection equipment. • Must have excellent hand eye coordination. • Reading and speech required to communicate comprehension of Job Hazard Analysis, machine specific lockout procedures, monthly safety training, etc. • Ability to prioritize, organize and make necessary decisions. Personal Expenses: Skilled craftsman are required to provide their own set of tools. The company will provide a tool allowance. Endurance
Carrying
|
Never/Not Required | Seldom (1-5%) |
Occasionally (6-33%) |
Frequently (34-66%) |
Continuous (67-100%) |
|
1-10 lbs. | x | ||||
11-20 lbs. | x | ||||
21-50 lbs. | x | ||||
51-75 lbs. | x | ||||
76 –100 lbs. | x | ||||
>100 lbs. | x |
Never/Not Required | Seldom (1-5%) |
Occasionally (6-33%) |
Frequently (34-66%) |
Continuous (67-100%) |
|
1-10 lbs. | x | ||||
11-20 lbs. | x | ||||
21-50 lbs. | x | ||||
51-75 lbs. | x | ||||
76 –100 lbs. | x | ||||
>100 lbs. | x |
Never/Not Required | Seldom (1-5%) |
Occasionally (6-33%) |
Frequently (34-66%) |
Continuous (67-100%) |
|
Bend/Stoop | x | ||||
Twist | x | ||||
Crouch/Squat | x | ||||
Kneel | x | ||||
Crawl | x | ||||
Walk (Level) | x | ||||
Walk (Uneven) | x | ||||
Climb Steps | x | ||||
Climb Ladder | x | ||||
Work at Heights | x | ||||
Reach Above Shoulder | x | ||||
Reach Below Shoulder | x | ||||
Use of Arms | x | ||||
Use of Wrists | x | ||||
Use of hands | x |
Never/Not Required | Seldom (1-5%) |
Occasionally (6-33%) |
Frequently (34-66%) |
Continuous (67-100%) |
|
Grasping/Squeezing | x | ||||
Operate Foot Controls | x |